Lynx Audio Cable quick start Cable Installation, Accessory cables available from Lynx, Support

STEP 5: Cable Installation

Connect L22 breakout cables to the Audio Port and Sync Port as shown below. Signals are assigned as follows: Audio Port provides connections for all analog audio I/O

Sync Port provides connections for digital I/O and clock I/O

L22

CABLE LABELS	AUDIO PORT
CBL-L22AUDIO

ANALOG OUT 1	OUT 1
ANALOG OUT 2
	OUT 2
ANALOG IN 1	IN 1
ANALOG IN 2
	IN 2

AES/EBU, S/PDIF IN

CBL-L22SYNC

DIGITAL IN

SYNC PORT

AES/EBU, S/PDIF OUT

DIGITAL OUT

CLOCK IN

SYNC IN

WORD CLOCK OUT

CLOCK OUT

QUICK START GUIDE

Thank you for purchasing the L22 from Lynx Studio Technology. This document will guide you through the installation process in a few easy steps. For more detailed information refer to the complete L22 manual which is included on the installation CD in PDF format.

Check the contents of the shipping carton. It should include the following:

L22 PCI Card in anti-static bag

L22 Audio Cable – P/N CBL-L22AUDIO with 4 XLR connectors

L22 Sync Cable – P/N CBL-L22SYNC with 2 BNC and 2 XLR connectors

Male and female S/PDIF adapter cables

Installation CD and Registration Card

Accessory cables available from Lynx

CBL-ICC: Internal Clock Cable used to sync multiple L22’s internally

TRS and RCA adapter cables used to adapt from XLR connectors on the L22 Audio Cable

Requirements

Windows PC or Macintosh with an empty PCI Slot, CDROM drive, and third party audio software Phillips screwdriver (if necessary for securing PCI card bracket)

Support

If you have questions or comments regarding the operation of your L22 please check the “Troubleshooting” section of the manual and the FAQ and Troubleshooting topics on the support section of the Lynx web site at:

http://www.lynxstudio.com/support.html

NEXT