M&S Systems S150W instruction manual S50W, S40W, Unpacking Your Speakers, Speaker Location

S50W

Frequency Response	50 Hz to 16 kHz
Maximum Power Rating	50 Watts
Impedance	8 Ohms
Overall Dimensions	8 5/8” W x 12” H x 3 3/8” D
Specifi cations	Two way; 6 ½” woofer, 1” mylar swivel
	tweeter
Mounting Dimensions	7 3/8” W x 10 ¾” H x 2 7/8” D
Grille	Metal
Color	White

S40W

Frequency Response	60 Hz to 20 kHz
Maximum Power Rating	40 Watts
Impedance	8 Ohms
Overall Dimensions	7 ½” W x 11” H x 3” D
Specifi cations	Two way; 5 ¼” woofer, 1” mylar
	swivel tweeter
Mounting Dimensions	6 1/8” W x 9 5/8” H x 2 5/8” D
Grille	Metal
Color	White

UNPACKING YOUR SPEAKERS

After carefully unpacking your speakers, the carton and the packing material should be saved for possible use later. If any speaker appears to be damaged, do not attempt to repair or to connect the unit to the amplifier. Repack the speaker and notify your distributor or M&S Systems for replacement or repair.

SPEAKER LOCATION

Careful consideration must be given to the speaker location to realize the full frequency range. In-wall speakers should be spaced 6 to 8 feet apart but no closer than 2 feet to any adjacent wall or ceiling. Typical height from the fl oor would be in the 4 to 6 foot range. Avoid placing speakers in air return wall cavities or walls containing plumbing. Do not install speakers in outside walls, stud cavities containing 120/240V appliances, within 18 inches of dimmers, security wiring and other control wiring.

2 of 7