M&S Systems WS5 owner manual S E R V I C E & T R O U B L E S H O O T I N G

FOR THE OTHER END.

3.Connect one wire from the black/negative (-) terminal of the left speaker to the black/negative (- ) terminal on the left speaker output channel of your amplifier or receiver.

NOTE: MOST SPEAKER WIRE IS COLOR CODED OR RIBBED ON ONE SIDE FOR EASY IDENTIFICATION OF THE POSITIVE AND NEGATIVE LEADS.

4.Connect the other wire from the red/positive (+) terminal of the left speaker to the red/positive (+) output terminal on the left channel of your amplifier or receiver.

5.Repeat these steps when hooking up your right channel speaker with the right channel of your amplifier or receiver.

6.Plug in your amplifier or receiver, turn it on and start enjoying your new WS5 outdoor speakers.

S E R V I C E & T R O U B L E S H O O T I N G

M&S Systems is committed to producing high quality products for the home. If you have any questions or problems with your new speakers or if they are not operating properly, contact your installer or call M&S Systems at 1-800-366-9422 and speak with one of our technical support specialists.

You may also visit our web site at www.mssystems.com for a frequently asked questions list that may provide you with quick assistance with any troubleshooting or service concerns.

Page 6