EX66 User Guide » 5
If you’re using a digital source with a S/PDIF interface, you
can feed it directly into the S/PDIF input
�
on the back of
one of your EX66 monitors using a high-quality 75Ω S/PDIF
cable. You must set the Input Select switch
��
to either
S/PDIF L or S/PDIF R depending on whether that speaker will
be reproducing the left or right half of the digital bitstream.
Next, run a high-quality 75Ω S/PDIF cable from the S/PDIF Out
jack
�
of that speaker to the S/PDIF In jack of your second
EX66 monitor, and make sure the Input Select switch
��
is set
to the appropriate setting for that speaker.