Installation Instructions

30Electric Cooktop

JP256
“If you have questions, call 800.GE.CARES or visit our website at: ge.com”

BEFORE YOU BEGIN

Read these instructions completely and carefully.

IMPORTANT Save these instructions

for local inspector’s use.

IMPORTANT Observe all governing

codes and ordinances.

Note to Installer – Be sure to leave these

instructions with the Consumer.

Note to Consumer – Keep these instructions for

future reference.

MATERIALS YOU WILL NEED

Junction Box

Wire Nuts

 

TOOLS YOU WILL NEED

• Product failure due to improper installation is not

covered under the Warranty.

WARNING This appliance must be properly grounded.

ATTENTION INSTALLER — ALL

Pencil

Phillips-Head Screwdriver

Saber Saw

COOKTOPS MUST BE HARD WIRED (DIRECT WIRED) INTO AN APPROVED JUNCTION BOX. A “PLUG AND RECEPTACLE” IS NOT PERMITTED ON THESE PRODUCTS.

Proper installation is the responsibility of the installer and product failure due to improper installation is NOT covered under warranty.

PARTS INCLUDED

Foam Tape

2 Hold-Down Brackets

 

6 Hex-Head Screws

 

(4 required, 2 extra)

 

2 Thumbscrews

1/4Nut Driver

1/8Drill Bit & Electric

or Hand Drill

 

Ruler or Straightedge

Safety Glasses

12