FUSSION 3000 SPECIFICATIONS

System Acoustic

Frequency Range (–10 dB): 45Hz-20kHz

Frequency Response (–3 dB): 55Hz-18kHz

Horizontal Coverage (–6 dB): 80º averaged 2kHz-10kHz

Vertical Coverage (–6 dB): 70º averaged 2kHz-10kHz

Directivity Factor; DI (Q): 10.19 (10.46) averaged

2kHz to 10kHz

Maximum SPL (long term): 130 dB @ 1m

Maximum SPL (peak): 133 dB @ 1m

Maximum SPL (long term—High Pass ON): 132 dB

Maximum SPL (peak—High Pass ON): 135 dB

Crossover Points:

500Hz, 2500Hz

Dynamic Range:

> 110 dB

Phase Response:

± 35º from 500Hz-10kHz

Line Input Power

US:

115V, 60Hz

Recommended Amperage Service:

 

20A recommended

AC Connector:

3-pin Twistlock

 

250VAC, 20A male

Europe:

230V, 50Hz

Recommended Amperage Service:

 

16A recommended

AC Connector:

3-pin IEC

 

250VAC, 16A male

In-rush Current Protection:

Transistor-based

Transducers

Low-Frequency Transducers—Four Each

Cone Diameter:

12˝ (300mm)

Voice Coil Diameter:

3˝ (75mm)

Nominal Impedance:

8 ohms each

Power Handling:

350 watts rms (long term)1

Mid-Frequency Transducer

 

Cone Diameter:

8˝ (200mm)

Voice Coil Diameter:

2˝ (50mm)

Nominal Impedance:

8 ohms

Power Handling:

150 watts rms (long term)1

High-Frequency Transducer

Diaphragm Diameter:

3˝ (75mm)

Throat Exit Diameter:

1.4˝ (35.6mm)

Nominal Impedance:

8 ohms

Power Handling:

75 watts rms (long term)1

Diaphragm Material:

Titanium

Power Amplifiers

Low-Frequency Power Amplifier

Rated Power:

1000W continuous @ 8Ω

 

1500W peak @ 8Ω

Rated THD:

< 0.03%

Mid-Frequency Power Amplifier

Rated Power:

200W continuous @ 8Ω

 

300W peak @ 8Ω

Rated THD:

< 0.03%

High-Frequency Power Amplifier

Rated Power:

100W continuous @ 8Ω

 

150W peak @ 8Ω

Rated THD:

< 0.03%

Audio Input/Output/Controls

Input Type:

Balanced differential

Input Impedance:

50k ohms

Sub-Out:

85Hz low-pass output

with protection and active monitoring for FUSSION 1800S/1800SA active subwoofer system

Fill-Out:

85Hz high-pass output

Fill-Out Level:

0 dB to –30 dB

Fill-Out Phase Control:

0º/180º

High-Pass Switch:

85Hz high-pass to LF

 

driver

Safety Features

RMS Limiting:

Monitoring and limiting

 

of continuous RMS

 

output of amplifiers

Thermal Protection:

Input stage shutdown,

 

auto-reset

Physical Properties

Enclosure:

Trapezoidal, 15º side

 

angles, 18mm multi-

 

layered birch

Hanging Inserts:

4 points on top

Rigging Inserts:

2 points, 1 each side

 

ATM MEGS

 

1 pull-back clip, bottom

Handles:

4 ea. aluminum/rubber

 

grips

Height:

41.9˝ (1064mm)

Front Width:

24.7˝ (628mm)

Rear Width:

13.9˝ (352mm)

Depth:

22.6˝ (575mm)

Weight:

246 lbs. (112kg)

Options

Active Subwoofer System:

 

FUSSION 1800SA/1800S

Flyware:

ATM MEGS compatible

Disclaimer

Since we are always striving to make our products better by incorporating new and improved materials, components, and manufacturing methods, we reserve the right to change these specifications at any time without notice.

“Mackie,” the “Running Man” figure, and “FUSSION” are trademarks or registered trademarks of Mackie Designs Inc.

All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged.

©2000 Mackie Designs Inc.

All Rights Reserved.

Printed in Italy.

1Power handling for transducers is based on an AES long term power

testing standard conducted for 100 hours full power, free air.

11