SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Only use attachments/accessories specified by the manufacturer.

10.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

11.The entire sound system must be designed in compliance with the current standards and laws regarding electrical systems.

12.When installing and using this apparatus, keep in mind the technical specifications indicated in the dedicated section of the manual.

13.Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a period of time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposures shown in the following chart.

According to OSHA, any exposure in excess of these permissible limits could result in some hearing loss. To ensure against potentially dangerous exposure to high sound pressure

levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels use hearing pro-

tectors while the equipment is in operation. Ear plugs or protectors in the ear canals or over the ears must be worn when operating the equipment in order to prevent a permanent hearing loss if exposure is in excess of the limits set forth here.

Duration Per Day

Sound Level dBA,

Typical

In Hours

Slow Response

Example

8

90

Duo in small club

6

92

 

4

95

Subway Train

3

97

 

2

100

Very loud classical music

1.5

102

 

1

105

Tami screaming at Adrian about deadlines

0.5

110

 

0.25 or less

115

Loudest parts at a rock concert

 

 

 

14.Rigging Precautions: When mounting or suspending Mackie loudspeaker enclosures, it is essential that load ratings, rigging techniques, and special safety considerations be appropriate for the installation. Use only the mounting/rigging points on the loudspeaker enclosure intended for this purpose. The user must determine the load requirements, dynamic loading, and any other contributing factors affecting the loudspeaker installation. The user must determine the proper safety factor for specific applications and the required load rating of the connection

to structure. Comply with all applicable federal, state, and local regulations.

Mackie strongly recommends the following rigging system practices:

Documentation: Thoroughly document the mounting/rigging design with detailed drawings and parts lists.

Analysis: Have a licensed structural engineer or other qualified professional review and approve the mounting/rigging design before its implementation.

Installation: Use personnel experienced and qualified for mounting/rigging loudspeakers in accordance with and in compliance with all federal, state and local regulations.

DANGER: Loudspeakers should be mounted or suspended only by persons with knowledge of the proper hardware and rigging techniques. When

stacking or pole-mounting loudspeakers, be sure that they are stabilized and secured from falling over or being accidentally pushed over. Failure to follow these precautions may result in damage to the equipment, personal injury, or death.

2