Rear Panel Features

OUTPUTS

Manual Owner’s

 

 

A

FULL RANGE

 

 

 

 

HD1501

 

5

15 -INCH HIGH DEFINITION POWERED SUBWOOFER

 

 

INPUTS

 

 

A

B

A

HIGH PASS

 

B

B

7

SETTINGS 10

THERMAL

 

POWER

9

LIGHT ON

SIG/ LIMIT

3

4

SERIAL NUMBER

6

POLARITY

INVERT

-6dB +6dB

LEVEL

8

REVISION

AVIS: RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR

MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

POWER

ON 2

1

1. IEC AC Receptacle

2. POWER

This jack accepts the supplied ­3-prong AC power cord. Before you plug the AC power cord into the

powered subwoofer, make sure that the

voltage of your unit is the same voltage as your local AC mains supply. Use only the power

cord supplied. Also, disconnecting the plug’s ground pin is dangerous. Don’t do it.

Use this switch to turn the HD1501 on and off. The LED above the switch will illuminate when powered on. The front panel LED will also turn on, but only if the POWER LIGHT ON switch (7) is engaged. Press the bottom of this switch to turn the subwoofer off.

As a general guide, powered subwoofers

should be turned on after the mixer and other

sources, but prior to full-range speakers. Additionally, they should also be powered off

after the tops, but before the mixer and other sources. This will reduce the possibility of any turn-on, or turn-off thumps in your speakers.

Owner’s Manual

7