Mackie M1200, M1400 SPECIFICATIONS

MACKIE DESIGNS INC.

16220 Wood-Red Rd. NE , Woodinville • WA • 98072 • USA

Toll-Free800/258-6883 • FAX 425/487-4337 • E-mail: sales@mackie.com • www.mackie.com For distribution information outside the USA, 425/487-4333 • FAX 425/485-1152

SPECIFICATIONS	Frequency Response:
SPECIFICATIONS	20Hz to 40kHz (+0, –1dB)
Continuous Average Output	20Hz to 40kHz (+0, –1dB)
Continuous Average Output	10Hz to 70kHz (+0, –3dB)
Power, both channels driven:	Distortion:
M•1200	Distortion:
M•1200	THD, SMPTE IMD, TIM
225 watts per channel into	THD, SMPTE IMD, TIM
225 watts per channel into	Ω
8 ohms from 20Hz to 20kHz, with	< 0.025%@8
8 ohms from 20Hz to 20kHz, with	< 0.050%@4Ω
no more than 0.025% THD	< 0.050%@4Ω
no more than 0.025% THD	< 0.150%@2Ω
400 watts per channel into	< 0.150%@2Ω
400 watts per channel into	Signal to Noise Ratio:
4 ohms from 20Hz to 20kHz, with	Signal to Noise Ratio:
no more than 0.050% THD	> 107dB below rated
600 watts per channel into	power into 4 ohms
2 ohms from 20Hz to 20kHz, with	Channel Separation:
no more than 0.095% THD	Channel Separation:
no more than 0.095% THD	> 80dB@1kHz
Bridged mono operation:	> 80dB@1kHz
Bridged mono operation:	Damping Factor:
800 watts into 8 ohms from 20Hz	Damping Factor:
to 20kHz, with no more than	> 350 from 0 to 400Hz
0.05% THD	Input Impedance:
1200 watts into 4 ohms from	Input Impedance:
1200 watts into 4 ohms from	20kΩ balanced bridging
20Hz to 20kHz, with no more	20kΩ balanced bridging
than 0.095% THD	Input Sensitivity:
Maximum Power at 1% THD (per	1.23 volts (+4dBu) for rated
IHF-A-202):	power into 4 ohms
250 watts per channel into 8Ω	Gain:
425 watts per channel into 4Ω	Gain:
425 watts per channel into 4Ω	30.25dB (32.5V/V)
640 watts per channel into 2Ω	30.25dB (32.5V/V)
640 watts per channel into 2Ω	Maximum Input Level:
850 watts into 8Ω bridged	Maximum Input Level:
1280 watts into 4Ω bridged	9.75 volts (+22dBu)
M•1400	Rise Time:	< 4.4∝s
250 watts per channel into	Slew Rate:
8 ohms from 20Hz to 20kHz, with	Voltage Slew Rate	> 50V/∝s
no more than 0.012% THD	> 100V/∝s bridged
425 watts per channel into	> 100V/∝s bridged
425 watts per channel into	Current Slew Rate
4 ohms from 20Hz to 20kHz, with	Current Slew Rate
4 ohms from 20Hz to 20kHz, with	> 32A/∝s at 2Ω
no more than 0.025% THD	> 32A/∝s at 2Ω
no more than 0.025% THD	CMRR: > 40dB, 20Hz to 20kHz
630 watts per channel into	CMRR: > 40dB, 20Hz to 20kHz
630 watts per channel into
2 ohms from 20Hz to 20kHz, with	Transient Recovery:
no more than 0.050% THD	< 1∝s for 20dB overdrive @ 1kHz
Bridged mono operation:	High Frequency Overload and
850 watts into 8 ohms from 20Hz	High Frequency Overload and
850 watts into 8 ohms from 20Hz	Latching:
to 20kHz, with no more than	Latching:
to 20kHz, with no more than	No latch up at any frequency or
0.025% THD	No latch up at any frequency or
0.025% THD	level
1260 watts into 4 ohms from	level
1260 watts into 4 ohms from	Variable Low-Cut Filter:
20Hz to 20kHz, with no more	Variable Low-Cut Filter:
than 0.050% THD	10Hz (Off) to 170Hz,
Maximum Power at 1% THD (per	2nd Order Bessel
IHF-A-202):

	280 watts per channel into 8Ω					Subwoofer Low-Pass Filter:
	280 watts per channel into 8Ω					Switched: 63Hz/125Hz,
	480 watts per channel into 4Ω					Switched: 63Hz/125Hz,
	480 watts per channel into 4Ω					3rd Order Bessel
	700 watts per channel into 2Ω					3rd Order Bessel
	700 watts per channel into 2Ω					Constant Directivity High
	960 watts into 8Ω bridged					Constant Directivity High
	960 watts into 8Ω bridged					Frequency Boost:
	1400 watts into 4Ω bridged					Frequency Boost:
	1400 watts into 4Ω bridged					2kHz to 6kHz (+3dB points)
	Note: Power ratings are specified					2kHz to 6kHz (+3dB points)
	Note: Power ratings are specified					6dB/octave high-frequency
	at 120VAC (U.S. and Canada) and					6dB/octave high-frequency
	at 120VAC (U.S. and Canada) and					shelving filter, (shelving occurs at
	240VAC (Export) line voltages.					shelving filter, (shelving occurs at
	240VAC (Export) line voltages.					approximately 30kHz)
	Power Bandwidth:					approximately 30kHz)
	Power Bandwidth:					Turn On Delay:
	20Hz to 70kHz (+0, –3dB)					Turn On Delay:
	20Hz to 70kHz (+0, –3dB)					3 seconds
						3 seconds

Limiter Section:

Complementary Positive and

Negative Peak Detecting

Indicators:

Six meter LEDs per channel

SIG (Signal Present),

–20, –9, –6, –3, OL (Overload) CH 1 & 2

PROTECT LEDs

SHORT LEDs

TEMP STATUS COLD, HOT LEDs

Power Consumption:
M•1200	120V	240V
65 watts at idle	0.9A	0.5A

500 watts with musical program

fully loaded

6.4A 3.2A

(4Ω per side, or 8Ω bridged) 850 watts with musical program

fully loaded	10.0A	5.0A
(2Ω per side, or 4Ω bridged)
800 watts at full power into 8Ω
(cont. sine wave)	9.3A	4.7A

1400 watts at full power into 4Ω (cont. sine wave) 15.0A 7.5A

2400 watts at full power into 2Ω

(cont. sine wave)	24.3A	12.2A
M•1400	120V	240V
65 watts at idle	0.9A	0.5A

550 watts with musical program

fully loaded

6.7A 3.4A

(4Ω per side, or 8Ω bridged) 900 watts with musical program

fully loaded	10.5A	5.3A
(2Ω per side, or 4Ω bridged)
850 watts at full power into 8Ω
(cont. sine wave)	9.6A	4.8A

1500 watts at full power into 4Ω (cont. sine wave) 15.6A 7.8A

2500 watts at full power into 2Ω (cont. sine wave) 24.8A 12.4A

AC Line Power:

US	120VAC, 60Hz
Europe	240VAC, 50/60Hz
Japan	100VAC, 50/60Hz
Korea	220VAC, 60Hz

AC Drop-out Voltage:

At approximately 50% of rated line voltage

Physical:
Height:	2U = 3.5"	(89mm)
Width:	19.0"	(483mm)
Depth:	15.25"	(387mm)
Handle Depth: 1.25"		(32mm)
Overall Depth: 16.25"		(413mm)
Weight:	36 lbs	(16.3kg)

Mackie Designs Inc. is engaged in a continuous program of product evaluation and improvement and reserves the right to change product

®specifications at any time without notice. The following are trademarks or registered

trademarks of Mackie Designs Inc.: “Mackie.”, the Running Man, and FR Series.

Speakon is a registered trademark of Neutrik.

Part No. 091-096-00 Rev. B 2/98

Reserved.