Appendix C: Technical Information
MR5mk2
MR5mk2 Specifications
Acoustic PerformanceFree Field Frequency Response:
50 Hz – 20 kHz
Sound Pressure Level @ 1 meter, +4 dBu into Balanced Input: 104 dB SPL @ 1m
Maximum SPL Per Pair: 116 dB SPL @ 1m
TransducersLow Frequency: | 5.25 in / 133 mm hyperbolic |
| curved cone woofer |
High Frequency: | Neodymium magnet driven |
| 1 in / 25 mm silk dome tweeter |
US: | 120 | VAC, 60 Hz |
Europe: | 240 | VAC, 50 Hz |
Korea: | 220 | VAC, 60 Hz |
Japan: | 100 | VAC, 50/60 Hz |
Note: The MR5mk2 does not support multiple voltage configurations. Make sure the voltage rating for your particular model (as indicated on the rear panel near the IEC socket) corresponds with your local AC mains voltage.
AC Connector: | |
Fuse: | 115 VAC: T 1.6AL/250 V |
| 230 VAC: T 800 mAL/250 V |
Power Consumption: |
|
| 75 watts with music, loud mix |
| 10 watts quiescent (idle) |
Low Frequency Power: | 55 watts, 4 Ω load, |
| 110 watts peak |
High Frequency Power: | 30 watts, 8 Ω load, |
| 60 watts peak |
Type: | Monolithic IC, Class AB with |
| DMOS power stage |
Crossover Type: | 24 dB/octave |
Crossover Frequency: | 3 kHz |
Sensitivity: | +4 dBu at 300 Hz for full output |
Input Impedance: | 20 kΩ, balanced bridging; |
| 10 kΩ unbalanced |
Low Frequency EQ: | +2 dB/+4 dB @ 100 Hz, shelving | ||
High Frequency EQ: | ±2 dB @ 5 kHz, shelving | ||
| 7.8" / 197 mm |
|
|
|
| ||
11.3" /
287 mm
Enclosure: | 0.625 in / 15 mm thick MDF with |
| 0.625 in / 15 mm MDF front panel |
Damping: | Adiabatic batting |
Dimensions: |
|
Height: | 11.5 in / 292 mm |
Width: | 7.8 in / 197 mm |
Depth: | 10.6 in / 269 mm |
Weight: | 14.3 lb / 6.5 kg |
LOUD Technologies is always striving to improve our products by incorporating new and improved materials, components and manufacturing methods. Therefore, we reserve the right to change these specifications at any time without notice.
MR5mk2
WEIGHT 14.3 lb / 6.5 kg
10.6" /
269 mm
12 | MR5mk2 |