MACKIE DESIGNS INC.• 16220 WOOD-RED RD. N.E.
WOODINVILLE • WA • USA • PHONE TOLLFREE 800/258-6883 FAX 425/487-4337 • OUTSIDE THE U.S., PHONE 425/487-4333

+28dBU balanced (–22dBU unbalanced); all other Outputs shall be capable of +22dBU maximum output level.

5.PHYSICAL CONFIGURA- TION. The main frame shall be grey-black with steel chassis. The mixer’s dimen- sions shall be 10.35" tall by 11.47" wide by 2.3" deep. Optional rack rail brackets shall be adjustable to allow flush mounting, which shall add an extra 0.7" to respec- tive depth measurements. The weight shall be 7 pounds.

6.MIXER INPUT SECTION. Each mixer Input Section shall include the following features: 2 AUX send con-

trols; 2 rotary equalization controls (± 15dB LO shelving at 80Hz, ± 15dB HI shelving at 12.5kHz), L/R rotary Pan control, and Rotary Channel Fader with center-detent Unity Gain position.

7.MIXER OUTPUT SECTION. The mixer Main Output Section shall have 2 Stereo AUX Returns consisting of 2 rotary Level controls, Left/ Right rotary Master Level control with center-detent Unity Gain position,12-step LED meter (calibrated –40 to +8, plus CLIP), Power LED,

2

Stereo Headphone Jack with rotary Headphone Level Control and Tape Monitor switch. The Headphone Level Control shall regulate the output level of signals appearing at the Headphone Output jack. In conjunction with the Input Channel Metering Switch, the LED display shall display 1) L/R main output levels or 2) Mic Preamp Output levels on the left display and Mix amp (prefader) level on the right display.

8. SPECIFICATIONS. In addition to specifications previously cited, the mixer shall meet or exceed the following performance criteria: Frequency Response, 20Hz to 20kHz ± 1dB; Distortion, less than 0.025%, 20–20kHz; Mic Preamp E.I.N. Noise –129dBm; Typical Main Output Noise, –90dBU; Working S/N Ratio, 90dB (weighted 400Hz to 20kHz), –83dB 20Hz to20kHz ref: +4dBU.

The mixer shall be a MackieDesigns MicroSeries 1202.

®Because Mackie Designs constantly

endeavors to improve its products with new components and manufacturing methods, all specifications are subject to change without notice. Rev 1.3 ©1995- 1998 Mackie Designs.

“Mackie.” is a registered trademark of Mackie Designs Inc.

1001 3/95 5m