HOOKUP DIAGRAMS

Quick-Start

Make all initial connections with the power switches OFF on all equip- ment. Make sure all master volume, level, or gain controls are all the way down.

1.Connect the line-level outputs from your mixing console (or other signal source) to the inputs of your power amplifier.

2.Connect the “Speaker Output” from your power amplifier (or powered mixer) to the INPUT connec- tor on the S225.

3.Turn on your mixing console (or other signal source).

4.Turn on the amplifier. Turn up its volume or gain control(s) as recommended by the manufacturer.

5.Start the signal source, whether it be speaking into a microphone or starting a CD player. Adjust the volume controls on the mixer (or other signal source) for normal operation.

Stereo

Power Amplifier

Left Right

Line-level Line-level

Output Output

Mixer or

Preamplifier

S225

 

 

S225

 

 

S225

 

 

 

S225

 

DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA

 

 

DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA

 

"MACKIE" AND THE "RUNNING MAN" FIGURE

 

 

"MACKIE" AND THE "RUNNING MAN" FIGURE

 

ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2004

 

 

ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2004

 

+ -

 

 

2800W

+ -

 

2800W

TIP SLEEVE

 

OHMS

• PEAK/

TIP SLEEVE

OHMS

• PEAK/

+1PIN+ -1PIN-

 

NOMINALIMPEDANCE:4

HANDLING:CONT/700W

+1PIN+ -1PIN-

NOMINALIMPEDANCE:4

HANDLING:CONT/700W

1/4"

 

 

 

1/4"

 

 

NL4

 

 

POWER

NL4

 

POWER

SERIAL NUMBER

MANUFACTURING DATE

 

 

SERIAL NUMBER

MANUFACTURING DATE

 

S225: WITH A MIXER AND POWER AMPLIFIER

S225

S225

S225

S225

 

Stereo Power Amplifier

From LEFT

 

 

From RIGHT

SPEAKER OUT

 

 

SPEAKER OUT

 

 

 

Line-level

 

 

 

THRU Connection

 

Stereo Power Amplifier

 

 

From LEFT

 

 

From RIGHT

SPEAKER OUT

 

 

SPEAKER OUT

S225: WITH A MIXER AND TWO POWER AMPLIFIERS

4