HOOKUP DIAGRAMS

Quick-Start

Make all initial connections with the power switches OFF on all equip- ment. Make sure all master volume, level, or gain controls are all the way down.

1.Connect the line-level outputs from your mixing console (or other signal source) to the inputs of your power amplifier.

2.Connect the “Speaker Output” from your power amplifier (or powered mixer) to the INPUT connec- tor on the S410s.

3.Turn on your mixing console (or other signal source).

4.Turn on the amplifier. Turn up its volume or gain control(s) as recommended by the manufacturer.

5.Start the signal source, whether it be speaking into a microphone or starting a CD player. Adjust the volume controls on the mixer (or other signal source) for normal operation.

S408

S410s

S410s

S408

S408

DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA

"MACKIE" AND THE "RUNNING MAN" FIGURE

ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2005

S410s

DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA "MACKIE" AND THE "RUNNING MAN" FIGURE

ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2005

S410s

DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA "MACKIE" AND THE "RUNNING MAN" FIGURE

ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2005

S408

DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA

"MACKIE" AND THE "RUNNING MAN" FIGURE

ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2005

Mono Bridged

Mono Bridged

Power Amplifier

Power Amplifier

LeftRight

Line-level

Line-level

Output

Output

Mixer or

1202-VLZ PRO

Preamplifier

 

S410S AND S408: WITH A MIXER AND TWO POWER AMPLIFIERS

4