Have your loudspeaker’s serial number ready. You must have an RA number before you can obtain service at the factory or an authorized service center.

2.Keep this owner’s manual. We don’t need it to repair the loudspeaker.

3.Pack the loudspeaker in its original package, including protective wrap, endcaps, and box. This is very impor- tant. When you call for the RA number, please let Tech Support know if you need new packaging. Mackie is not responsible for any damage that occurs due to non-factory packaging.

4.Include a legible note stating your name, shipping address (no P.O. boxes), daytime phone number, RA number, and a detailed description of the prob- lem, including how we can duplicate it.

5.Write the RA number in BIG PRINT on top of the box.

6.Ship the loudspeaker to us. We suggest insurance for all forms of cartage. Ship to this address:

Horn Type

Constant Directivity

Mouth Size

10.6˝

(269 mm) W x

 

10.6˝

(269 mm) H

Throat Size

1.0˝ (25 mm)

System Specifications

Frequency Range (–10 dB)

50 Hz–22 kHz

Frequency Response (–3 dB)

75 Hz–20 kHz

Horizontal Coverage (–6 dB) 75º averaged

 

1 kHz–10 kHz

Vertical Coverage (–6 dB)

65º averaged

 

1 kHz–10 kHz

Directivity Factor; DI (Q)

10.93 (12.38) averaged

 

2 kHz–10 kHz

Sensitivity (1W@1m)

100 dB

Rated Maximum SPL@1m

124 dB long term

 

127 dB peak

Crossover Point

1300 Hz

Nominal System Impedance

8 ohms

Power Handling

250 watts RMS

Safety Features

 

High Frequency: Monitoring and limiting of continuous input power via MOSFET-based electronic circuit

Low Frequency: Monitoring of amplifier signal delivered to woofer via current breaker switch. Overpowering of woofer opens circuit and requires resetting by pressing the circuit breaker button.

Mackie Designs
SERVICE DEPARTMENT
Building #11
One Main Street
Whitinsville, MA 01588

7.We’ll try to fix the loudspeaker within three to five business days. Ask Tech Support for the latest turnaround times when you call for your RA number. The product MUST be packaged in its original packing box and have the RMA number appear on the box. Once it is repaired, we’l ship it back the same way in which it was received. This para- graph does not necessarily apply to non-warranty service.

SPECIFICATIONS

Transducer Specifications

Low-Frequency Transducer

Diameter

15˝ (381 mm)

Voice Coil Diameter

2.5˝ (64 mm)

High-Frequency Driver and Horn

Diaphragm Diameter

1.75˝ (44 mm)

Voice Coil Diameter

1.75˝ (44 mm)

Diaphragm Material

Titanium

Power Handling

30 watts RMS (long term)

Physical Properties

Height

32.1˝ (817 mm)

Front Width

19.1˝ (484 mm)

Rear Width

13.9˝ (353 mm)

Depth

18.1˝ (460 mm)

Net Weight

75 lbs. (34 kg)

Connector Type

1/4˝ TS jack and Neutrik Speakon

Enclosure Geometry

Trapezoidal, 10º side angles, 18 mm multi-layered plywood, top and bottom high pressure resin injected “caps”

Handles One on top, one on bottom cap, two three-piece handles on each side

Color Black, PVC coated finish

Grille Custom perforated oval steel grille with anti-corrosive treatment

Disclaimer

Since we are always striving to make our products better by incorporating new and improved materials, components, and manufacturing methods, we reserve the right to change these specifications at any time without notice.

“Mackie” and the “Running Man” figure are trademarks or registered trademarks of Mackie Designs Inc.

All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged.

©2003 Mackie Designs Inc.

All Rights Reserved.

4