Daisy-chaining two subwoofers
SRM1801 | SRM1801 |
Subwoofer 2 | Subwoofer 1 |
| Mixing Console |
| (Mackie 1604-VLZ3 shown) |
| Full-Range |
| Output |
From Mixer
Output
The left and right line-level outputs from a mixer feed the left and right inputs of the first Mackie SRM1801 powered subwoofer. The inputs are summed in mono to play in the subwoofer, but this does not affect the full-range or high-pass outputs, which remain fully stereo. The left and right full-range line- level outputs of this subwoofer feed the left and right inputs of the second Mackie SRM1801 powered subwoofer. The high-pass outputs or full-range outputs of either subwoofer could feed the other powered loudspeakers in your system.
A lot of low-end
| | | | Straps | | | Straps |
| | | | | | | | | | | |
| | | | | | | | | | | | | |
Right Main | | | | | | Left Main |
Powered | | | | | | Powered |
Loudspeaker | | | | | | Loudspeaker |
(Mackie SRM450v2 | | | | | | | | | | | (Mackie SRM450v2 |
| | | |
shown) | | | | | | | | | | | shown) |
| | | |
| | | | | | | | | | | | | |
| | | | | | | | | | | | | |
| | | | | | | | | | | | | |
| | | | | | | | | | | | | |
High-Pass
Outputs
SRM1801 Right | SRM1801 Left |
Subwoofer 2 | Subwoofer 2 |
Full-Range
Outputs
From Mixer | From Mixer |
Right Output | Left Output |
SRM1801 Right | SRM1801 Left |
Subwoofer 1 | Subwoofer 1 |
Mixing Console
(Mackie Onyx 1640i shown)
The left and right line-level outputs from a mixer feed the inputs of a pair of Mackie SRM1801 powered subwoofers. Their respective full-range outputs feed the inputs of another pair of Mackie SRM1801 powered subwoofers. The high-pass outputs from the second set of subwoofers then feed the inputs of a pair of Mackie SRM450v2 powered loudspeakers.
NOTE: It is highly recommended that you use straps to secure your loudspeakers for stacked scenarios such as this one. Be sure to loop a strap through each handle going down each side of the cabinet setup,
