Getting Started
The following steps will help you set up your loudspeakers quickly.
INITIAL SETTINGS:
1.Turn the LEVEL control on the rear panel all the way down.
2.Set the EQ ON/OFF switch out (OFF).
3.Turn the POWER switch OFF.
CONNECTIONS:
1.Connect the
2.Connect the supplied AC power cord to the IEC socket on the back of the loudspeaker. Plug the other end into an AC outlet properly configured with the correct voltage as indicated just below the IEC socket.
TURN IT ON:
1.Turn the POWER switch ON.
2.Start your signal source (mp3 player, CD, DAW, band, or whatever), but leave the master level control on your mixer down.
3.Slowly turn up the LEVEL control on the
4.Adjust the master volume on your mixer to a comfortable listening level. If the volume from the speakers gets really loud, really fast, try turning down the LEVEL control on the
Now that you have your loudspeakers working, it’s time to hunker down and read the rest of this manual… especially the following:
ADDITIONAL TIDBITS OF WIDSDOM:
•Never listen to loud music for prolonged periods.
Please see the Safety Instructions on page 2 for information on hearing protection.
•When you shut down your equipment, turn off the
•Save the shipping boxes and packing materials!
You may need them someday. Besides, your
cat will love playing in them and jumping out at you unexpectedly. Remember to pretend like you are surprised!
•Save your sales receipt in a safe place.
•Record the serial number in the space provided on page 3, along with where and when you bought it.
4