PANIC ALARMS
To send a silent or audible alarm to your Security Company, press and hold one of the button combinations listed for 3 seconds.
Panic Alarm Type | Button Combinations |
Press [1] & [3] | |
emergency | Press [4] & [6] |
Auxiliary | |
Fire | Press [7] & [9] |
ALARM MEMORY DISPLAY
To view the alarms that occurred during the last armed period:
1.Disarm the system.
2.Press the [MEM] key.
3.The corresponding zone numbers that were in alarm the last time the system was armed will illuminate.
4.Press the [CLEAR] key to exit.
TROUBLE DISPLAY
When a trouble condition occurs, the [TBL] key will illuminate.
1.Press the [TBL] key. The key will flash and number(s) corresponding to the trouble(s) will illuminate.
2.Read the corresponding explanation of the trouble from the trouble list on the keypad door label.
3.Press the [CLEAR] key to exit.
KEYPAD SETTINGS
To mute the keypad:
Press and hold the [CLEAR] key for 10 seconds to enable or disable Keypad Muting.
To modify the backlight:
1.Press and hold the [
] key for 3 seconds.
2.Press the [
] key to set the desired backlight level.
3.Press [CLEAR] or [ENTER] to exit.
BYPASS PROGRAMMING
Bypassed zones remained unarmed when the partition is armed.
1.Press the [BYP] key.
2.Enter your [ACCESS CODE].
3.The corresponding LED of all bypassed zones will illuminate. Select the zone(s) you want to bypass/unbypass by entering the
4.Press the [ENTER] key to save and exit.
© Paradox Security Systems Ltd.,
paradox.com |
|
PRINTED IN CANADA 03/2007 |
