Before Putting Into Use
zBefore connecting the appliance to the power supply, let it stand for about 2 hours, which will reduce a possibility of malfunctions in the cooling system due to transport handling.
zClean the appliance, and be thorough, especially in the interior (See “HOW TO CLEAN”).
zIn case the interior accessories are not correctly placed, rearrange them as described in chapter “NAME OF THE PARTS”.
Instructions for Use
These instructions for use are intended for the user. They describe the appliance and its correct and safe use. They were prepared for various types/models of refrigerators therefore you may find in it description of some functions and accessories that your appliance does not have.
Tips for Energy Savings
zTry not to open the door too often, especially when the weather is wet and hot. Once you open the door, mind to close it as soon as possible.
zEvery now and then check if the appliance is sufficiently ventilated (adequate air circulation around the appliance).
zSet thermostat from higher to lower settings as soon as possible (depends on how loaded the appliance is ambient temperature etc).
zBefore loading the appliance with packages of fresh foods, make sure they are cooled to ambient temperature.
zIce and frost layer increase energy consumption, so defrost the appliance as soon as the layer is 1/8” thick.
1
