Operation Procedure, Wattage Output Chart

OPERATION PROCEDURE

This section includes useful information about oven operation.

1	Plug power supply cord into a standard 3-pronged	Time clock returns to the present time when the
	15 Amp, 120V AC 60Hz power outlet.	19 cooking time ends.
2	After placing the food in a suitable container,	10 When the STOP/CLEAR pad is touched during the
	open the oven door and put it on the glass tray.	oven operation, the oven stops cooking and all
	The glass tray and roller guide must always be in	information retained. To erase all information(except
	place during cooking.	the present time), touch the STOP/CLEAR pad
3		once more. If the oven door is opened during the
	Close the door. Make sure that it is firmly closed.	oven operation, all information is retained.
4	The oven light is on when the microwave oven is	If the START pad is touched and the oven does not
	operating.	11 operate, check the area between the door and door
5		seal for obstructions and make sure the door is
	The oven door can be opened at any time during	closed securely. The oven will not start cooking until
	operation by pulling the handle of door. The oven	the door is completely closed or the program has
	will automatically shut off.	been reset.
6	Each time a pad is touched, a BEEP will sound to
			Make sure the oven is properly installed and
	acknowledge the touch.		plugged into the electrical outlet.
7	The oven automatically cooks on full power

	unless set to a lower power level.
8	The display will show “ : 0” when the oven is
	plugged in.

•The power-level is set by touching the Micro Power pad. The chart shows the display, the power level and the percentage of power.

Touch the Micro Power pad	Power level (Display)	Approximate Percentage of Power

once	P-HI	100%

twice	P-90	90%

3 times	P-80	80%

4 times	P-70	70%

5 times	P-60	60%

6 times	P-50	50%

7 times	P-40	40%

8 times	P-30	30%

9 times	P-20	20%

10 times	P-10	10%

11 times	P-00	0%