OPERATING PROCEDURES & MAINTENANCE
UNPACKING YOUR ICE MAKER
1.Remove all exterior and interior packaging. Check that ice basket and ice scoop is included. If any part or accessory is missing, please contact our customer service.
2.Clean the interior with lukewarm water and a soft cloth. Remove the ice basket and wash it in warm water.
3.Find a location for your ice maker that is protected from direct sunlight and other sources of heat (i.e.: stove, furnace, radiator). Place the ice maker on a level surface. Maker sure that there is at least 5 inches of space between the back and sides of your ice maker and the wall.
4.Allow one hour for the refrigerant fluid to settle before plugging in the unit.
5.The appliance must be positioned so that the plug is accessible.
CONNECTING YOUR ICE MAKER
! | DANGER |
*Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged please call our customer service.,
1.This unit should be properly grounded for your safety. The power cord of this appliance is equipped with a
2.Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not under any circumstances, cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician.
3.This appliance requires a standard 115 volt, 60Hz electrical outlet with
Before using your ice maker, it is strongly recommended to clean it thoroughly.
The icemaker is not designed to be installed in an outside area such as a garage or a porch. Ambient temperatures of below 50℉or above 100.4℉ will hinder the performance of the appliance.
5
