Automatic Start Function
Automatic Start Function is used by programming the brew start time in advance. For example, if the current time is 8:10 AM, you may program the appliance to start brewing at 1:00 PM. At 1:00 PM, the green light AUTO will turn off, and the red light RUN will be turn on for automatically starting the appliance. The coffee can be kept warm after brewing. If the coffee maker is unattended for 2 hours, the appliance will power off automatically.
First follow the operating instruction steps 1 to 5, and set the automatic start function as the following.
1.Press PROG button, then LCD will display CLOCK.
2.Set the current time by pressing the HOUR and MIN (see Fig. 1)
NOTE: The time cycle is 24 hours. Set the desired time by using the HOUR and MIN buttons.
3.Press PROG button again, then LCD will display TIMER. Set the automatic start time by pressing the HOUR and MIN buttons. (Fig. 2)
4.Press the ON/OFF button twice, then the green light AUTO will be illuminated after about 10 seconds. LCD will display the current time, you may see the automatic start time by pressing PROG.
NOTE: The auto start function can be cancelled by pressing ON/OFF button. If you want to change the auto start time, repeat steps 1 to 3.
Hints for Great Tasting Coffee
1.A clean coffee maker is essential for making
2.Store unused coffee grounds in a cool, dry place. After opening a package of coffee grounds, reseal tightly and store it in a refrigerator to maintain its freshness.
3.For optimum coffee taste, buy whole coffee beans and finely grind them just before brewing.
4.Do not reuse coffee grounds since this will greatly reduce the coffee flavor. Reheating the coffee is not recommended as the coffee flavor peaks immediately after brewing.
5.Clean the coffee maker when
6.Oiliness may occur more often if heavily roasted coffee beans are used.
9
