Changing The Inner Light
Before removing the inner light, turn off the appliance first and then unplug the unit from the wall outlet. Failure to do so could result in electrical shock or personal injury.
•Use Phillips screwdriver to take out the screw.
•Remove the transparent light cover gently.
•Pull out the existing light bulb by unscrewing it
•Insert new light bulb (E12, max. 15W) by screwing it in clockwise.
•Replace the transparent light cover and tighten screw.
Automatic Defrost
There is no need for manual defrosting of this appliance due to automatic defrosting function.
•The ice
•Defrost water will drain out passing through the drain outlet in the inner back wall into a drain pan located above the compressor, from where it evaporates.
CHANGING THE REVERSIBLE DOOR
This appliance is built with a reversible door. You have the choice of either opening it from the left or the right side. In order to reverse the opening direction of your door, please follow these simple instructions. NOTE: If desired, please change the door swing prior to appliance installation.
Caution: To avoid personal injury to yourself and/or property, we highly recommend that someone assist you during the door reversal process.
1)Remove the top hinge assembly and keep them for later use.
2)Remove the bottom hinge assembly and keep them for later use.
3)Remove the plug buttons from the upper left holes and transfer them to the uncovered holes on the right side. Be sure to press the plug buttons firmly into the hole.
4)
5)
6)
7)Ensure that the door assembly is properly aligned with cabinet before tightening the screws.
8 | EN |
