Before Putting Into Use
·Before connecting the appliance to electrical power supply, leave it to stand for about 2 hours, which will reduce the possibility of malfunctions in the cooling system due to transport handling.
·Clean the appliance thoroughly, especially in the interior (See Cleaning and Maintenance).
·In case the interior accessories are not correctly placed, rearrange them as described in chapter "Description of the Appliance".
Instructions for Use
These instructions for use are intended for the user. They describe the appliance and correct operating procedures for safe use .
SAVE THESE INSTRUCTIONS:
Tips for Energy Saving
·Try not to open the door too often, especially when the weather is hot and humid. Once you open the door , close it as soon as possible. This is especially important if you have an upright model .
·Every now and then check if the appliance is sufficiently ventilated ( adequate air circulation behind the appliance ).
·Set the thermostat from higher to lower settings as soon as possible (depends on how loaded the appliance is, ambient temperatures etc.).
·Ice and frost layers increase energy consumption, so clean the appliance as soon as the frost layer is
·If the gasket is damaged or the door seal is poor, energy consumption is substantially higher. To restore efficiency, replace
the gasket.
·Always consider instructions stated in sections Positioning and Energy Saving Tips, otherwise the energy consumption is substantially higher.
2
