Magnadyne BT-HFKP10 Restore to Default-Remove Previous Pairing & Connection, LED Indication

Mute:

a. To mute the speakerphone, quickly press the “MODE” button. Meanwhile, the speakerphone will

beep 1 time every 15 seconds and the LED flashes red.

b. To un-mute the speakerphone, quickly press the “MODE” button.

Call Inter-Changing:

Speakerphone to Handset:During a conversation press and hold the +and

buttons simultaneous-

ly to switch operation from the speakerphone to the handset.

Handset to Speakerphone:Press the multi-function button to switch operation from the handset to

the speakerphone.

You may want to reset the speakerphone to its original settings and clear the previous pairing. Please

follow these simple steps.

1. Ensure the speakerphone is under standby mode.

2. Press and hold the volume +and

buttons simultaneously for 10 seconds until LED flashes blue

and red alternatively. Release the buttons.

3. Again, press and hold the +and

buttons simultaneously for 2 seconds until speakerphone emits

2 short beeps. The speakerphone will be powered off and back to default setting.

4. After defaulting, if speakerphone is powered on again, the LED will flash red every 3 seconds and

speakerphone will emit 3 beeps every 1 minute. Then, the speakerphone will be powered off with-

in 2 minutes. The speakerphone will be back to normal when LED flashes blue every 3 seconds

after completion of pairing with Bluetooth devices.

Operation Instructions (Continued)

Speakerphone Mode Red LED Blue LED Sound

Off Mode Off Off

Power On Flashes every 3 seconds Short Beep

Power Off On for 3 seconds Long Beep

Standby - Before Pairing Flashes every 3 seconds 3 Beeps every

minutes

Standby - Low Voltage Flashes every 3 seconds

Talking in Progress Flashes every 15 seconds

Pairing in Progress Flashes alternatively Flashes alternatively

Pairing Completed Flashes every 3 seconds Long Beep

Mute Steady On

Small Volume Steady On

Charging in Progress Steady On

Charging Completed Off Off