LS9600UCDW/LS8600UCDW Manual 5/29/02 11:07 AM Page 6
INSTALLATION
The unit can be installed under a cabinet or on top of a counter. Such locations would include mounting under a kitchen cabinet, living room cabinets or under a cabinet or ledge in a bedroom. The unit can also be installed on a counter top (clock radio style).
1.Locate a suitable spot for installation. Regardless if the installation is under counter or counter top, the minimum space required is 14.5" (W) x 9" (D) x
2.Remove the "U" shaped mounting bracket by releasing the thumb screws (4 pieces) on the side of the unit. Use the bracket as a drill guide and drill four 1/8" holes. If you plan to use self tapping type screw, you can place the bracket in the proper location and power drive the mounting screws in place. Install four (4) mounting screws to secure the bracket.
3.Slide the unit onto the bracket and install the four (4) thumb- screws by hand. Set the unit into it's final position and finish tightening the screws.
Note: The unit can be tilted about 10 degrees in the event that the mounting surface is not level or the unit is being installed on a counter top as a clock radio. Place the unit in the position desired and tighten the thumb screws.
6
