WARNING:

TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER AND THAT NO OBJECT FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON APPARATUS.

CAUTION

PRECAUTIONS

CAUTION:

To avoid electric shock, this appliance must not be exposed to dripping or splashing water Maintain a minimum clearance around the appliance for sufficient ventilation; Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains, etc.

Do not place any source of open flame, such as a lighted candle, on the appliance;

Before discarding the appliance, remove the batteries and place them in a proper battery collection container.

Caution Mark is located on bottom of product

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

LASER SAFETY

CLASS 1 LASER PRODUCT

This appliance contains a laser. Only qualified

 

The symbol of a lightning flash with arrowhead inside an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltagewithin the products enclosure, which may be of sufficient magnitude to constitute a risk of electric shock to people

Warning: to reduce the risk of electric shock, do not remove the cover (or the back). There are no user-serviceable parts inside. Servicing should be perfromed by qualified service personnel.

The exclamation point inside an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Use of controls or adjustments, or performance of procedures other than those specified herein, may result in hazardous radiation exposure.

CLASS 1 LASER PRODUCT

LASER DE CLASSE 1

KLASS 1 LASERAPPARAT

CAUTION

service personnel should attempt to repair it.

DANGER: INVISIBLE LASER RADIATION

WHEN THE APPLIANCE IS OPEN AND

THE INTERLOCK IS FAILED OR

DEFEATED. AVOID DIRECT EXPOSURE

TO THE BEAM.

CAUTION: HAZARDOUS LASER

RADIATION WHEN THE APPLIANCE IS

OPEN AND THE INTERLOCK IS

DEFEATED.

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this appliance near water.

6.Clean only with a dry cloth.

7.Do not block any ventilation openings. Follow the manufacturer’s instructions for installation.

8.Do not install near radiators, heat registers, stoves, or other heat sources, including appliances that produce heat (e.g.: amplifiers).

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades, with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the plug that is provided does not fit into your outlet, consult an electrician in order to replace the obsolete outlet.

10.Protect the power cord from being walked on or pinched, especially at the plug, the outlet, and the point where it exits from the appliance.

11.Only use attachments/accessories that are specified by the manufacturer.

12.Unplug the appliance during lightning storms or when it will not be used for long periods of time.

13.All servicing must be performed by qualified personnel. Servicing is required when the appliance has been damaged in any way, for example, if the power cord or plug is damaged, if liquid has been spilled or objects have fallen into the appliance, if the appliance has been exposed to rain or moisture, if the appliance does not operate normally, or if the appliance has been dropped.

14.Do not expose this appliance to dripping or splashing water, and do not place objects filled with liquids, such as vases, on top of the appliance.

CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH THE WIDE BLADE OF THE PLUG TO THE WIDE SLOT, AND INSERT IT FULLY.

E 1

CLEANING: Always disconnect the appliance from the power supply before attempting to clean it. Use a soft cloth moistened with soapy water, and wipe gently.

Do not use solvents or abrasive materials.

IMPORTANT

Since CD circuitry may cause interference to other radio or television tuners nearby, switch this unit off when not in use or move it away from the affected radio tuner.

NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television operation (which can be determined by turning the equipment off), the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

E 2

Page 2
Image 2
Magnasonic CRD1180M instruction manual Precautions