T8201UB_QSG_EN 3/7/06 12:03 PM Page 1
13MC3206
There are many ways to connect your new TV/DVD to your other equipment.This Quick Start Guide shows the easiest, most common connections for the TV/DVD.
ANTENNA or
CABLE TV SIGNAL
CABLE TV SIGNAL
OUTIN
CABLE BOX
4 
2
3
RF COAXIAL CABLE
ANT.ANT.
OR
1 Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
2 If you do not have a Cable Box, simply connect your Antenna or Cable TV signal directly to the ANT(enna) jack on the rear of the TV/DVD.
3 If you do have a Cable Box or Satellite Receiver, first connect the Cable TV or Satellite signal to the IN jack on the Cable Box or Satellite Receiver. Then, use an RF coaxial cable (not supplied) to connect the OUT jack of the Cable Box or Satellite Receiver to the ANT(enna) jack on the TV/DVD. To view any channel, set the TV/DVD to the output channel of the Cable Box or Satellite Receiver (channel 3 or 4).Then, select channels at the Cable Box or Satellite Receiver.
4 When all connections are complete, plug the power cord of the TV/DVD into an active power outlet.
5 Press
