USINGTHE AV1 INORAV2 IN(INPUT) JACKS
4
The TV’s audio/video input jacks are for
direct picture and sound connections
between the TV and a VCR (or similar
device) that has audio/video output jacks.
Both the AV1and AV2 Input Jack connec-
tions are shown on this page,but either
one can be connected alone.Follow the
easy steps below to connect your accessory
device to the AV1and AV2 IN Jacks located
on the back of the TV.
1Connect the VIDEO (yellow)
cable to the VIDEOAV1IN (or
AV2 IN) jack on the back of the TV.
2Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) AV1IN (or AV2 in) jacks
on the rear of the TV.
3Connect the VIDEO (yellow)
cable to the VIDEOOUT jack on
the back of the VCR (either one or
two) or accessory device being used.
4Connect the AUDIO (red and
white) cablesto the AUDIO (left
and right) OUT jacks on the rear of
the VCR (either one or two) or
accessory device being used.
5Turn the VCR (either one or
two) or accessory device and
the TV ON.
6
Press the CH + or CH- buttons
to set the TV to its AV1or AV2
channel. (Go to your lowest channel,
for example channel 1,then change
channels down to find the correct
input.)
7With either of the VCRs (or accesso-
ry devices) ON and a prerecorded
tape (CD,DVD,etc.) inserted, press
the PLAY button to view the tape
on the television.
L/Mono
Monitor out
VIDEO
S-VIDEO
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
COMPONENT VIDEO INPUT
AUDIO OUT
R L
S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
1
AUDIO OUT
R L
S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
3
4
57
1
22
4
3
57
Audio and video cables are not
supplied with the TV,but are avail-
able from Magnavox or electronics
retailers.
HELPFUL HINT
Audio In
(Red and
White)
VCR Two (or accessory
device) (Equipped with
Video and Audio Output Jacks)
Video In
(Yellow)
Back of VCR
Back of TV
AV1
Connection
AV2
Connection
VCR One (or accessory
device) (Equipped with Audio
and Video Output Jacks)