9
INTRODUCTION PREPARATION WATCHING TV
USING FUNCTIONS OPERATING DVD
CONNECTING DEVICES
INFORMATION USEFUL TIPS
English

Mounting the Unit on Your Furniture

Screw this unit on your furniture tightly using wood screws
(not supplied) in the 2 holes at the back of the base as shown.
Recommended screw dimension : 0.201 x 0.788 inches (5.1 x 20 mm)
screw holes
screw holes
rear of the unit
rear of the unit
Note
When you remove this unit make sure to unscrew the wood
screws from your Wood Stand, Furniture and other wood item.
Tilt Stand <22MD311B / 19MD311B / 19MD301B only>
You can adjust the stand to change
the angle of the unit (-2.5° to 10°).
10°
-2.5°

Installing the Batteries

Install the batteries (AAA, 1.5V x 2) matching the polarity
indicated inside battery compartment of the remote control.
AAAAAAAAA
AAA
AAAAAA
Battery Precautions:
Be sure to follow the correct polarity as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
Do not mix different types of batteries together (e.g. Alkaline and
Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or old
batteries with fresh ones.
If the device is not to be used for a long period of time, remove the
batteries to prevent damage or injury from possible battery leakage.
Do not try to recharge batteries; they can overheat and rupture.