Magnavox MCR220BK warranty Switching OFF the Alarm, Sleep

SWITCHING OFF ALARM SLEEP

Gentle Wake Volume

A sure way of getting up in the mornings, the gentle wake volume for the alarm begins from a fixed gentle volume (10) and gradually increases to a maximum higher setting of ( 25.)

•The default low volume is Lo : 10, and the

maximum volume is HI : 25.

•During the alarm call, if you press 4 or 3, the volume stops increasing immediately.

•The gentle wake volume settings do not affect normal CD and radio playback volume level, unless you have pressed 4 or 3 during the alarm call.

SWITCHING OFF THE ALARM

There are three ways to switch off the alarm. Unless you cancel the alarm completely, the 24 HOUR ALARM RESET will be automatically selected after 59 minutes, from the time your alarm time first goes off.

24 HOUR ALARM RESET

If you want the alarm mode to be stopped immediately but also wish to retain the same alarm setting for the following day:

•Press ALARM RESET.

yYou will hear a beep tone to confirm the 24 hour alarm is reset.

REPEAT ALARM

This will repeat your alarm call at 9-minute intervals.

•During the alarm call, press REPEAT ALARM/ BRIGHTNESS CONTROL.

•Repeat if desired up to an hour.

Note:
• The selected alarm mode	,	or

indicators flashes throughout the repeat alarm duration.

•If you are using the CD alarm mode, CD playback resumes at the point where the repeat alarm interrupted.

•During the CD alarm, CD playback continues for up to an hour unless you cancel / reset the alarm.

CANCELING THE ALARM COMPLETELY

To cancel the set alarm time before it goes off, or during the alarm call:

•Press AL1 or AL 2 once or more until the selected alarm indicator disappears from the display. yYou will hear a beep tone to confirm the alarm

has been cancelled.

SLEEP

About Sleep

The CD clock radio has a built-in sleep timer which enables the set to be automatically switched off during radio or CD playback after a set period of time. There are 3 sleep times: 60, 30 and 15 minutes.

The sleep function does not change the operation of your alarm settings.

Setting SLEEP

1.Press 2; (CD) or RADIO ON (radio) to switch on the desired mode.

•You can also press SLEEP if you want the timer in radio mode.

2.Select your timer option by

pressing SLEEP once or more until the desired option is shown.

•Display shows SL: and the timer options:

60➟ 30➟ 15 minutes ➟ 60➟ 30...

3.To cancel the timer function you can either:

• Press ALARM RESET.

•Press REPEAT ALARM/ BRIGHTNESS CONTROL.

•Press SLEEP once or more until the sleep function is no longer shown.