Magnavox MDV2300 Information, Specifications, Output signal format Operating temperature Weight

F		Reset to the Default Setting (Except for PARENTAL Setting)
1	Press [SETUP]		2 Select “INITIALIZE”.	3 Select the desired PLAYER
			SETUP	MENU Language, using
				[the Number buttons]
	STOP		ENTER

ENTER

Note:

• When you do not

wish to initialize,

press [SETUP] to

exit the menu at

step 2.

<SETUP MENU>

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

PLAYER MENU

Troubleshooting Guide

Press twice.

INITIALIZE_INITIALIZE

INITIALIZE YES

INFORMATION

SELECT MENU LANGUAGE

1ENGLISH

2 FRENCH

3 SPANISH

If the unit does not perform properly when operated as instructed in this owner’s manual, refer to the following.

Problem	Corrective action
No power	–Check if the AC power cord is properly connected.
	–Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.
No sound or picture	–Check if the TV is switched on.
	–Check the video connection.
	–Check the audio/video cable connections to the TV. (Refer to page 6.)
	–Sometimes a small amount of picture distortion may appear. This is not a malfunction.
Distorted picture	–Connect the unit directly to the TV.
	–Set “PROGRESSIVE” correctly in “DISPLAY” menu. Turn it on only if your TV has progressive scan and
	you are using the component video connections between the unit and the TV. Disable progressive
	scan for all other connections. (Refer to page 6.)
Completely distorted picture or	–Connect this unit directly to the TV.
black/white picture with DVD	–Make sure the disc is compatible with the unit.
No sound or distorted sound	–Adjust the volume.
	–Check that the speakers are connected correctly.
No audio at digital output	–Check the digital connections.
	–Check if the audio format of the selected audio language matches your receiver capabilities.
No DTS audio is output.	This unit does not support DTS audio. This is not a malfunction.
Picture freezes momentarily during playback.	–Check the disc for fingerprints/dirty and clean with a soft cloth wiping from center to edge.
	–Clean the disc.
	–Ensure the disc is inserted in correct direction.
Disc cannot be played back.	–Check if the disc is defective by trying another disc.
	–Cancel the parental lock or change the control level.
	–Insert a correct disc that plays back on this unit.
	–Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
No return to start-up screen when disc is removed.	–Reset the unit by switching off the unit, then on again.
	–Aim the remote control directly at the sensor on the front panel.
	–Reduce the distance to the unit.
The unit does not respond to	–Replace the batteries in the remote control.
	–Re-insert the batteries with their polarities (+/– signs) as indicated.
the remote control.	–Tune your radio to an empty AM station so that you hear a lot of noises. Then, turn up the volume. If you hear
	some signal sound from the radio by pressing buttons on the remote control, the remote control is working.
	–Press and hold any button on remote control toward a digital camera. The remote control is working if
	you confirm infrared light through the digital camera.
Buttons do not work or the unit stops responding.	–To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.
The unit does not respond to some	–Operations may not be permitted by the disc. Refer to the instructions of the disc.
operating commands during playback.
The unit cannot read CD / DVD.	–Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for repair.
Angle does not switch.	–The angle cannot be switched for DVD which do not contain multiple angles. In some cases multiple
	angles are only recorded for specific scenes.
Playback does not start when the title is selected.	–Check the “PARENTAL” setting.
The password for rating level has been forgotten.	–Enter the default password “4737”, then your forgotten password will be cleared.

•Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for more details on correct operations.

•Playback from a desired track and random playback are not available during programmed playback.

•Some functions are prohibited on some discs.

Specifications

Output signal format:	Operating temperature:			Weight:
NTSC color	41°F (5 °C) to 104 °F (40 °C)			Approx 1.80 lbs. (0.80 kg)
Power source:	Dimensions:			• Designs and specifications are subject to
120 V AC +/- 10 %, 60 Hz +/- 0.5 %	W : 8.3 inches		(210 mm)	change without notice.
Power consumption:	H	: 2.0 inches	(50 mm)	• If there is a discrepancy between languages,
7 W (standby : 0.9 W)	D	: 9.7 inches	(245 mm)	the default language will be English.

INFORMATION

17 EN