Installing/Removing

Getting things ready to install your appliance (continued)

Electricity

Make sure that the voltage and frequency available correspond with the values stated on the data plate located at the back of the machine and that the electric system is dimensioned to withstand the maximum current shown on the data plate. If the socket the machine is connected to does not correspond with the plug, replace the plug with a suitable one and avoid using adapters or shunts since they could cause over heating and burn out.

Grounding

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having and equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING- Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified or service representative or personnel if you are in doubt as to whether the appliance is

properly grounded.

Do not modify the plug provided with the appliance: if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Electrical Specifications:

Voltage/Amperage - 110V, 12 Amp, 60 Hz 3 Prong plug attached to the appliance in the factory Circuit/Protection - 3 wires single phase, 110V, 60 Hz, AC separate 15 amp circuit or greater.

Recessed, Closet and Alcove Installations

This appliance may be installed in a recessed area, closet or alcove. All measurements are in inches.

If the appliance is to be installed in a closet with zero clearance on the side of the appliance, a total of 12 square inches of free air space movement to the back of the unit must be allowed into the closet.

If a door is to be installed that potentially encloses the unit while running, the door must allow for a minimum of 20 square inches of free air movement. There must also be a 1” space from the front of the unit to the closed door and 1” from the back of the unit to the wall. Additional spacing should be considered for easy installation, servicing, removal and compliance with applicable local, state and federal codes.

The floor must be able to support at least 280 lbs and a surface that is solid and level. If machine is to be placed in cabinet, up off the floor, it may be necessry to secure the drum with a tether to prevent excessive drum movement. Plese call Majestic Appliances for more information.

Installations in RV’s or Marine pleasure craft suggest that the machine might best be installed midships in the boat, or over the axles of the RV where movement is at a minimum.

Adequate blocking should prevent extreme movement when installed in an RV or Marine pleasure craft.

If the appliance is to be installed in a closet, the installation must be completed by a qualified person or service representative.Adequete blocking to secure unit is required.

Additional clearances for floor, wall or door moldings may be required.

Page 7

Majestic LLC © 01/01/2006

Page 7
Image 7
Majestic Appliances MJ-9200W owner manual Electricity, Recessed, Closet and Alcove Installations

MJ-9200W specifications

Introducing the Majestic Appliances MJ-9200W, a state-of-the-art kitchen appliance that is designed to revolutionize cooking and enhance your culinary experience. With its sleek and modern design, this multi-functional device stands out in any kitchen, providing both aesthetic appeal and high performance.

One of the standout features of the MJ-9200W is its versatility. This appliance combines the functions of an air fryer, pressure cooker, steamer, and slow cooker in one compact unit. This means that not only can you fry your favorite foods with minimal oil for healthier meals, but you can also pressure cook meats to perfection, steam vegetables retaining their nutrients, or slow cook delicious stews and soups for hours.

Technologically advanced, the MJ-9200W incorporates a user-friendly digital control panel that allows you to set precise cooking times and temperatures. With several pre-programmed settings, you can easily switch between cooking modes, making meal preparation effortless. The intuitive touchscreen interface also features a bright display, ensuring you can monitor the cooking process at a glance.

Another significant aspect of the MJ-9200W is its rapid cooking technology. The high-pressure system, combined with efficient heat circulation, significantly reduces cooking time without compromising flavor or texture. Whether you're whipping up a quick weeknight dinner or preparing elaborate weekend meals, the MJ-9200W saves you precious time in the kitchen.

Safety is a top priority with the MJ-9200W. It features advanced safety mechanisms, including a safety lock lid, pressure monitoring system, and cool-touch handles that ensure you can handle the appliance without risk of burns. These features give users peace of mind while cooking.

Additionally, the removable non-stick cooking pot makes clean-up a breeze. The dishwasher-safe components also add convenience, allowing you to focus on enjoying your meal rather than stressing over the cleanup.

In summary, the Majestic Appliances MJ-9200W is a versatile and advanced kitchen appliance that blends functionality with safety and user-friendly design. By mastering multiple cooking methods and incorporating innovative technology, it elevates everyday cooking while saving you time and effort. Perfect for busy families or culinary enthusiasts, the MJ-9200W is an essential addition to any modern kitchen.