![](/images/new-backgrounds/1331683/33168315x1.webp)
INSTALLATION
Secure the table saw so that it will not move during operation. Bolt or screw the cabinet to a bench (see 4 hole's in the base) or secure legs with screws.
Leave more than 30 cm (12") clearance between the table and a wall to allow chip ejection.
9.62"
1244.3 mm)
7
I 15 26"
l(387 6 mm)
13.14" Hole diameter 5/16" 18 mml (333.8 mml
11
CUTTING DEPTH ADJUSTMENT
The cutting depth is obtained by raising or lowering the blade with the elevating knob; Move left to lower, right to raise it. The cutting depth indicator tells you the depth of cut by the arrow pointer.
NOTE: Use a shallow depth setting when cutting thin materials in order to obtain a cleaner cut.
8