Makita 4191D ASSEMBL Y

Loosen the clamping screw on the bevel scale plate on the

front of the base. Set for the desired angle (0° - 45° ) by tilting

accordingly, then tighten the clamping screw securely.

For straight cuts, align the A position on the front of the base

with your cutting line. For 45° bevel cuts, align the B position

with it.

CAUTION:

•Before inserting the battery cartridge into the tool,

always check to see that the switch trigger actuates

properly and returns to the “OFF” position when

released.

To prevent the switch trigger from being accidentally pulled, a

lock-off lever is provided.

To start the tool, slide the lock-off lever in the direction of the

arrow and pull the switch trigger. Release the switch trigger

to stop.

ASSEMBLY CAUTION:

•Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out any

work on the tool.

1. Clamping screw

2. Bevel scale plate

003517

1. Cutting line

003521

1. Lock-off lever

2. Switch trigger

003525