11.When operating the saw, keep the
cord away from the cutting area and position it so that it will not be caught on the workpiece during the cutting operation.
Operate with proper hand support, proper work support, and supply cord routing away from the work area.
ATYPICAL ILLUSTRATION OF PROPER SUPPORT, AND SUPPLY CORD ROUTING.
I
Fig. ;
WARNING:
It is important t o support the work properly and t o hold the saw firmly t o pre- vent loss of control which could cause personal injury. Fig. 2 illustrates typical hand support of the saw.
12.Never attempt t o saw with the cir- cular saw held upside down in a vise. This can lead t o serious acci- dents, because it is extremely dan- gerous.
13.Before setting the tool down after completing a cut, be sure that the lower (tele- scoping) guard has closed and the blade has come t o a complete stop.
SAVE THESE INSTRUCTIONS.
6
