Operation
1 ) When using without your power tool connected :
To start the dust collector, press the "ON' side of the switch. Press the "OFF" side of the switch to stop.
2When using with your power tool con- nected:
This dust collector has an outlet for ac- cepting the plug of your power tool. When your power tool is plugged into this outlet and the dust collector is switched on, the dust collector will be in i t s
Switch
OUl
CAUTION :
0 Maximum input of power tools which can be connected to the dust collector is 12 A. Check the power tool nameplate carefully before you attempt to connect the power tool.
0 Always be sure that the dust collector and your power tool are switched off and un- plugged before connecting your power tool to the dust collector.
Overload protector
The overload protector on the dust col- lector automatically cuts out to stop the dust collector and your power tool, when- ever heavy work i s prolonged. If this occurs, switch off both the dust collector and your power tool, and wait 20 - 30 seconds before pressing the restart button to resume operation.
CAUTION :
Do not keep the restart button pressed with tape, etc.
6
