–Ensure that batteries are charged using the cor- rect charger recommended by the manufacturer. Incorrect use may result in a risk of electric shock, overheating or leakage of corrosive liquid from the battery.
20.Have your tool repaired by a qualified person
–This tool is constructed in accordance with the rel- evant safety requirements. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in consider- able danger to the user.
21.Disposal of battery
–Ensure battery is disposed of safety as instructed by the manufacturer.
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY
1.SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instruc- tions for battery charger.
2.Before using battery charger, read all instruc- tions and cautionary markings on (1) battery charger, (2) battery, and (3) product using bat- tery.
3.CAUTION — To reduce risk of injury, charge only MAKITA type rechargeable batteries. Other types of batteries may burst causing personal injury and damage.
4.Do not expose charger to rain or snow.
5.Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to per- sons.
6.To reduce risk of damage to electric plug and cord, pull by plug rather than cord when discon- necting charger.
7.Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
8.Do not operate charger with damaged cord or plug — replace them immediately.
9.Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman.
10.Do not disassemble charger or battery; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
11.To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY
1.Do not charge battery when it or air temperature is below 10°C (50°F) or above 40°C (104°F).
2.Do not charge or leave battery in a location exposed to direct sunlight.
3.Do not attempt to use a
4.Do not allow anything to cover or clog the charger vents.
5.Do not short the battery:
(1)Do not touch the terminals with any conduc- tive material.
(2)Avoid storing battery in a container with other metal objects such as nails, coins, etc.
(3)Do not expose battery to water or rain.
A battery short can cause a large current flow, overheating, possible burns and even a break- down.
Always cover the battery terminals with the bat- tery cover when the battery is not used.
6.Do not incinerate the Battery even if it is severely damaged or is completely worn out. The battery can explode in a fire.
7.Be careful not to drop, shake or strike battery.
8.Do not charge inside a box or container of any kind. The battery must be placed in a well venti- lated area during charging.
ADDITIONAL SAFETY RULES FOR BATTERY- POWERED PRUNING SHEARS
1.This tool is for pruning branches. Do not use it for any job except that for which it is intended.
2.Don’t use the tool or perform battery charging operations in the rain.
3.Don’t leave the tool in rain or wet locations.
4.Keep bystanders well away from your work area.
5.Be careful not to catch foreign matter between the blades. If the blades are jammed with foreign matter, immediately switch off the tool and dis- connect the battery from the tool. Then remove the foreign matter from the blades.
6.Never hold the branch you are pruning with your free hand. Keep your free hand away from the cutting area. Never touch the blades, they are very sharp and you may cut yourself.
7.Don’t force the tool to make it cut. You could slip and injure yourself or cut something else unin- tentionally.
8.Avoid cutting electrical wires that may be hid- den.
9.Always check the blades carefully before opera- tion.
10.Handle the blades with extreme care to prevent cuts or injury from the blades.
11.Disconnect the battery from the tool after each use and before attempting to perform inspection or maintenance.
12.When not in use, always keep the tool in its hol- ster.
SAVE THESE INSTRUCTIONS.
7
