17.Extension cords. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table 1 shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.
Table 1. MINIMUM GAUGE FOR CORD SETS
|
|
|
| Total Length of Cord in Feet |
| |
|
|
| 0 - 2 5 | 1 | ||
Ampere Rating | I | |||||
More | NotMore | I | AWG |
|
| |
Than |
| Than |
|
|
|
|
0 | - | 6 | 18 | 16 | 16 | 14 |
6 | - | 10 | 18 | 16 | 14 | 12 |
I | - |
|
| 16 | 14 | 12 |
10 | 12 | 16 | ||||
I 12 | - | 16 | 14 | 12 | Not recommended | |
18.Outdoor use extension cords. When tool is used outdoors, use only extension cords intended for outdoor use and so marked.
19.Stay alert. Watch what you are doing. Do not operate tool when you are tired.
20.Guard against electric shock. Prevent body contact with grounded surfaces, for example: pipes, radiators, ranges, refrigerator enclosures.
21.Replacement parts. When servicing, use only identical replacement part.
22.Polarized plugs:To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
3
