Sighting
The front of the base is notched to provide two guide edges.
For straight cuts, align the edge with 0" engraved on it with your cutting line on the workpiece.
For 45" bevel cuts, align the edge with 45" engraved on it with your cutting line.
For straight cuts I For 45" bevel cuts
Cutting line
Switch action
CAUTION:
Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.
To prevent the trigger from being acciden- tally pulled, a
To start the tool, slide the
7
Operation
Hold the tool firmly. Set the base plate on the workpiece to be cut without the blade making any contact. Then turn the tool on and wait until the blade attains full speed. Now simply move the tool forward over the workpiece surface, keeping it flat and advancing smoothly until the sawing is completed. To get clean cuts, keep your sawing line straight and your speed of advance uniform.
I \
I L
I Base '
CAUTION:
*Always gently keep the tool moving straight ahead when cutting. Forcing or twisting the tool will result in overheating of the motor and dangerous kickback, possibly causing severe injury.
*If the tool is operated continuously until the battery cartridge has discharged, allow the tool to rest for 15 minutes before proceeding with a fresh battery.
15
