12
NOTE:
The adjusting ring does not lock when the pointer is
positioned only halfway between the graduations.
Do not operate the tool with the adjusting ring set
between the number 16 and the marking. The tool
may be damaged.
ASSEMBLY CAUTION:
Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out any
work on the tool.

Installing or removing driver bit or drill bit

Hold the ring and turn the sleeve counterclockwise to open
the chuck jaws. Place the bit in the chuck as far as it will go.
Hold the ring firmly and turn the sleeve clockwise to tighten
the chuck.
To remove the bit, hold the ring and turn the sleeve counter-
clockwise.
1. Tighten
2. Sleeve
3. Ring
1
3
2
001724