Switch action
Tool speed is increased by increasing pres- sure on the trigger. To start the tool, simply pull the trigger. Release the trigger to stop. For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it.
CAUTION :
Before plugging in the tool, always check to see that the trigger switch actuates porperly and returns to the "OFF" position when released.
Reversingswitch action
This tool has a reversing switch to change the direction of rotation. Move the revers- ing switch lever to the "FWD" position for clockwise rotation or the "REV" position for counterclockwise.
CAUTION:
0 Always check the direction of rotation before drilling.
0 Use the reversing switch only when the tool comes to a complete stop. Changing the direction of rotation before the tool stop may ruin the tool.
5
