Hole
0The hole on the heel of the tool is a con- venient way to carry it by a cord, hook or other means.
Drill chuck (Accessory)
0 To install a drill chuck, remove the insert bit by a strong jerk, then a drill chuck can be replaced with the insert bit by a sharp push of the hand.
.To install the drill bit, place it in the chuck as far as it will go. Tighten the chuck collar by hand. Place the chuck key in each of three holes, and tighten clockwise.
0 To remove the drill bit, place the chuck key into the chuck hole and turn counterclock- wise.
CAUTIONS:
0 Be sure that the battery cartridge has been removed from the tool.
Always set the
9