ADDITIONAL SAFETY RULES
1.Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
2.Hold the tool firmly.
3.Keep hands away from rotating parts.
4.When driving into walls, floors or wherever "live" electrical wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the insulated grasping surfaces to prevent electric shock if you drive into a "live" wire.
5 . Do not touch the bit or the workpiece immediately after operation: they may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
4
