6

FUNCTIONAL

DESCRIPTION CAUTION:
•Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.

Switch action

CAUTION:
•Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the “OFF”
position when released.
To start the tool, simply pull the switch trigger. Release the
switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch trig-
ger fully, then release it.

Reversing switch action

This tool has a reversing switch to change the direction of
rotation. Press the upper side (FWD side) of the reversing
switch for clockwise rotation or the lower side (REV side) of
the reversing switch for counterclockwise rotation.
CAUTION:
•Always check the direction of rotation before operation.
•Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.

Hook

The hook is convenient for hooking the tool to your belt. It
can be installed on either side of the tool. To remove it, pull it
out in the direction of the arrow while raising. To install the
hook, push it down until it “clicks” into place on the tool.
1. Lock button
2. Switch trigger
1
2
002629
1. Reversing switch
1
002636
1. Hook
1
002648