Screwdriving operation
Place the point of the driver bit in the screw head and apply pressure to the tool. Start the tool. Release the trigger as soon as the stopper touches the workpiece. The electric brake will then stop the tool immediately.
NOTE :
Use the proper bit for the head of the screw that you wish to use.
Make sure that the driver bit is inserted straight in the screw head, or the screw and/or bit may be damaged.
If you continue driving the screw after the screw is fully seated, the screw and/or bit may be damaged.
Overload protector
The overload protector automatically cuts out to break the circuit whenever heavy work is prolonged. Wait
MAINTENANCE
CAUTION :
Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
9
