Makita 6903VD ASSEMBLY

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch trigger actuates

properly and returns to the “OFF” position when

released.

Tostart the t ool, simply pull the switch trigger. Toolspeed is

increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

This tool is equipped with an electric brake. If the tool consis-

tently fails to quickly stop after switch trigger release, have

tool serviced at a Makita service center.

This tool has a reversing switch to change the direction of

rotation. Slide the reversing switch to the A side (appear “F”

marking) for clockwise rotation or to the B side (appear “R”

marking) for counterclockwise rotation.

CAUTION:

• Alwayscheck the direct ion of rotation before operation.

• Usethereversingswitchonlyafterthetoolcomestoa

complete stop. Changing the direction of rotation before

the tool stops may damage the tool.

ASSEMBLY CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out any

workon the tool.

Use only the driver bit or socket bit shown in the figure. Do

not use any other driver bit or socket bit.

1. Switch trigger

002813

1. Reversingswitch

002820

12mm

(15/32”)

9mm

(3/8”)

001266