Installing or removing the battery cartridge
0 Always switch off the tool before insertion or removal of the battery cartridge.
0 To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool.
0 To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into
place. Snap the set plate back into place.
Be sure to close the set plate fully beforeBattery cartridge 1 \ using the tool.
0 Do not use force when inserting the battery cartridge.
If the cartridge does not slide in easily, it is not being inserted correctly.
Charging
0 Your new battery cartridge is not charged. You will need to charge it before use. Use the fast charger Model DC1201 to charge the battery cartridge.
0 Plug the fast charger into the proper A/C | Charging light |
| |
voltage source. The charging light will |
|
flash in green color. |
|
0 Insert the battery cartridge so that the |
|
plus and minus terminals on the battery |
|
cartridge are on the same sides as their |
|
respective markings on the fast charger. |
|
| DC1290 | DC1201 |
1200 | Approx. 60 min. | Approx. 45 min. |
1201/ I 201A | - | Approx. 60 min. |
|
|
6
