2
SPECIFICATIONS

• Manufacturerreserves the right to change specifications without notice.

• Specificationsmay differ from country to country.

GENERAL SAFETY RULES USA002-2

(For All Tools)

WARNING:

Read and understand all instructions. Failure to follow all

instructions listed below, may result in electric shock, fire and/or

serious personal injury.

SAVE THESE INSTRUCTIONS

Work Are a

1. Keep your work area clean and well lit.
Clutteredbenches and dark areas invite acci-
dents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
toolscreate spar ks which mayignite the dust
orfumes.
3. Keep bystanders, children, and visitors
awaywhile operating a power tool. Distrac-
tionscan cause you to lose control.

ElectricalSafety

4. Double insulated tools are equipped with
a polarized plug (one blade is wider than
the other.)This plug will fit in a polariz ed
outletonly one way. If the plug does not fit
fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified elec-
trician to install a polarized outlet. Do not
changethe plug inany way. Double insula-
tion eliminatesthe need for the three wire
grounded power cord and grounded power
supplysystem.
5. Avoid body contact with grounded sur-
facessuch as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electricshock if your body is grounded.
Capacities Noload
speed(RPM)
Impactsper
minute
Max.fasten-
ingtorque Overalllength Netweight
Standardbolt Hightensile
bolt
10mm- 16mm
(3/8”-5/8”)
8mm- 12mm
(5/16”- 1/2”) 0- 3000/min. 0 - 3000 150N • m
(111ft• lbs)
233mm
(9-1/8”) 1.4kg(3lbs)