Makita 9005B, 9005BZ MAINTENANCE , AC C E S S O R I E S

MAINTENANCE CAUTION:

•Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

The tool and its air vents have to be kept clean. Regularly

clean the tool’s air vents or whenever the vents start to

become obstructed.

Remove and check the carbon brushes regularly. Replace

when they wear down to the limit mark. Keep the carbon

brushes clean and free to slip in the holders. Both carbon

brushes should be replaced at the same time. Use only iden-

tical carbon brushes.

Use a screwdriver to remove the brush holder caps. Take out

the worn carbon brushes, insert the new ones and secure

the brush holder caps.

To maintain product SAFETY and RELIABILITY, repairs, any

other maintenance or adjustment should be performed by

Makita Authorized or Factory Service Centers, always using

Makita replacement parts.

ACCESSORIES CAUTION:

•These accessories or attachments are recommended for

use with your Makita tool specified in this manual. The

use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

•Your tool is supplied with a guard for use with a

depressed center grinding wheel, multi-disc and wire

wheel brush. A cut-off wheel can also be used with an

optional guard. If you decide to use your Makita grinder

with approved accessories which you purchase from

1. Exhaust vent

2. Inhalation vent

001164

1. Limit mark

001145

1. Brush holder cap

2. Screwdriver

001151