Makita 9032 ASSEMBL Y

The belt speed can be infinitely adjusted between 5 m and

28 m per second (980 - 5600 ft./min.) by turning the speed

adjusting dial to a given number setting from 1 to 6.

Higher speed is obtained when the dial is turned in the direc-

tion of number 6; lower speed is obtained when it is turned in

the direction of number 1. Select the proper speed for the

workpiece to be sanded.

CAUTION:

• The speed adjusting dial can be turned only as far as 6

and back to 1. Do not force it past 6 or 1, or the speed

adjusting function may no longer work.

ASSEMBLY CAUTION:

• Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Pull the cam lever all the way out. Install the belt over the rear

pulley, and slip the belt over the front pulley, with the belt

pulled out to the front arm. Return the cam lever to the origi-

nal position.

Switch on the tool and make sure that the belt is aligned

properly.

Use the adjusting dial to center the belt tracking. Turn the

adjusting dial clockwise to incline the arm to the right, or

counterclockwise to incline it to the left.

1. Speed adjusting dial

001218

1. Arm

2. Abrasive belt

3. Cam lever

4. Rear pulley

001219

1. Arm

2. Adjusting dial

001220